DEBREX 50
Nano Emulsification & Dispersion System
Optimized for Formulation Development
DEBREX 50 is a research-grade system for precise nano emulsification and dispersion.
It is optimized for formulation development and delivers high reproducibility
and uniform dispersion quality in laboratory environments.
It is optimized for formulation development and delivers high reproducibility
and uniform dispersion quality in laboratory environments.
DEBREX 50
| Basic Specification | ||
|---|---|---|
| Dimensions (mm) & Weight (kg) | Focused Ultrasonic Processor | 915mm(W) × 520(D) × 340(H), 41kg |
| Generator | 485mm(W) × 530(D) × 230(H), 17kg | |
| Controller | 485mm(W) × 530(D) × 230(H), 11kg | |
| Performance Specification | ||
| Power | Input Voltage | AC100V – 240V, 50 / 60Hz |
| Power Consumption | 440W (AC220V), 350W (AC100V) | |
| Current | 2A (AC220V), 4A (AC100V) | |
| Power Type | Single-phase | |
| Operating Frequency | 350kHz – 420kHz | |
| Power | Max 100W | |
| Solvent Pump | Flow Rate: 0 – 500 mL/min, Wash 900 mL/min | |
| Syringe Pump & Syringe | Input Flow Rate | 0.5 – 500 mL/min |
| Output Flow Rate | 0.3 – 100 mL/min | |
| Syringe Volume | 50 mL | |
| Cooling System | External cooling circulator required | |
| Cooling Circulator | ||
| Cooling Capacity | 400W ▲ | |
| Temperature Range | 0°C – 80°C (±1°C) | |
| Pump Bath Volume | 5 L ▲ | |
| Pump Flow Rate | 12.8 L/min, multi-stage adjustable | |
| Pump Pressure | Max 2.4 psi | |
| * Cooling circulator must be supplied separately | ||
| Environmental Conditions | ||
| Operating Temperature / Humidity | 10°C – 30°C / 30% – 60% RH | |
| Storage Temperature / Humidity | 0°C – 60°C / 10% – 90% RH | |
